티스토리 뷰
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
#anonymous_enable=YES #익명 사용자 FTP서비스 접속 가능여부 설정
#
# Uncomment this to allow local users to log in.
local_enable=YES #로컬 계정 사용자 접속 가능여부 설정
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES #쓰기 가능 여부
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022 # 파일 생성 퍼미션 설정 (디렉토리 755 / 파일퍼미션 644)
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES # 익명사용자 파일 업로드 가능여부
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES # 익명사용자 디렉토리 생성 가능 여부
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES # 디렉토리 이동시 메시지 출력
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES #파일 업/다운로드 시 로그파일 저장 여부
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES #데이터 전용 포트
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES # 익명 접속자가 업로드한 파일의 소유권 자동 변경 여부
#chown_username=whoever # 소유권 자동 변경 후 그 소유권을 변경할 사용자 설정
#
# The name of log file when xferlog_enable=YES and xferlog_std_format=YES
# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
#xferlog_file=/var/log/xferlog #로그파일 저장 경로
#
# Switches between logging into vsftpd_log_file and xferlog_file files.
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=YES # 로그파일 포맷 설정
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600 #idle 상태에서 접속 유지 시간
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120 #파일 업/다운로드 시 연결을 유지할 시간
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure #익명사용자 사용할 사용자 설정 ?
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES # async_abor 사용 가능 여부
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES # 아스키 파일 업로드 가능 여부
#ascii_download_enable=YES # 아스키 파일 다운로드 가능 여부
#
# You may fully customise the login banner string:
ftpd_banner="환영 합니다." # 접속시 접속자에게 보여줄 메시지
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_local_user=YES #홈디렉토리 위로 이동 제한
#chroot_list_enable=YES #chroot 제외할 사용자 목록 파일 사용 여부
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list #사용자 목록과 파일 경로
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES # ls -R 사용가능 여부
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES # standalone 모드
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd with two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES
pam_service_name=vsftpd # pam 인증시 사용할 설정파일 이름
userlist_enable=YES # userlist에 있는 계정 접속 허용
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
#anonymous_enable=YES #익명 사용자 FTP서비스 접속 가능여부 설정
#
# Uncomment this to allow local users to log in.
local_enable=YES #로컬 계정 사용자 접속 가능여부 설정
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES #쓰기 가능 여부
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022 # 파일 생성 퍼미션 설정 (디렉토리 755 / 파일퍼미션 644)
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES # 익명사용자 파일 업로드 가능여부
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES # 익명사용자 디렉토리 생성 가능 여부
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES # 디렉토리 이동시 메시지 출력
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES #파일 업/다운로드 시 로그파일 저장 여부
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES #데이터 전용 포트
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES # 익명 접속자가 업로드한 파일의 소유권 자동 변경 여부
#chown_username=whoever # 소유권 자동 변경 후 그 소유권을 변경할 사용자 설정
#
# The name of log file when xferlog_enable=YES and xferlog_std_format=YES
# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
#xferlog_file=/var/log/xferlog #로그파일 저장 경로
#
# Switches between logging into vsftpd_log_file and xferlog_file files.
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=YES # 로그파일 포맷 설정
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600 #idle 상태에서 접속 유지 시간
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120 #파일 업/다운로드 시 연결을 유지할 시간
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure #익명사용자 사용할 사용자 설정 ?
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES # async_abor 사용 가능 여부
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES # 아스키 파일 업로드 가능 여부
#ascii_download_enable=YES # 아스키 파일 다운로드 가능 여부
#
# You may fully customise the login banner string:
ftpd_banner="환영 합니다." # 접속시 접속자에게 보여줄 메시지
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_local_user=YES #홈디렉토리 위로 이동 제한
#chroot_list_enable=YES #chroot 제외할 사용자 목록 파일 사용 여부
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list #사용자 목록과 파일 경로
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES # ls -R 사용가능 여부
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES # standalone 모드
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd with two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES
pam_service_name=vsftpd # pam 인증시 사용할 설정파일 이름
userlist_enable=YES # userlist에 있는 계정 접속 허용
tcp_wrappers=YES # tcp_wrappers 접근 제외 받도록.
반응형
댓글